Non-asbestos Seals_Company News_Chengdu Teamful Gasket Technology Co., Ltd.

[Abstract] Non-asbestos Seals -100% None of Any Asbestos, 100% No Chemical Solvent!

Non-asbestos Seals -100% None of Any Asbestos, 100% No Chemical Solvent!

Environmentally-friendly non-asbestos sealing gaskets have excellent performances of high temperature resistance, oil resistance, acid/alkali/corrosion resistance, high strength and high sealing performance. The products are no pollution and no harm to human, totally protected the sealing surface from corrosion comparing to asbestos material. Even after engines are dismantled for times, the product interfaces still remain perfectly as ever.
Non-asbestos Seals

Material Application List - Non-asbestos

◆ High Level — Intend for Cylinder Head Gasket and Exhaust Manifold Gasket of all kinds of internal combustion engines such as gasoline engine, diesel engine and etc.

Material Type	Density (g/cm³)	Compressibility (%, at 34.5 MPa)	Recovery (%)	Short duration temp. (℃, max.)
WAG-TL1300	2-3	8-18	≥40	400
WAG-TL1304	2-3	8-18	≥40	400
WAG-TL1300-P	2-3	8-18	≥40	400
WAG-TL1304-P	2-3	8-18	≥40	400
WAG3-TL1304	3-4	8-17	≥35	400
WAG-TL1310	≥2.5	8-18	≥40	400
WAG3-TL1310	3-4	8-17	≥35	400

◆ Middle Level — Intend for oil and water sealing for gasoline, diesel and all kinds of internal combustion engines

Material Type	Density (g/cm³)	Compressibility (%, at 34.5 MPa)	Recovery (%)	Tensile Strength (MPa, min.)	Short duration temp. (℃, max.)
TL1201-L	≥1.28	15-25	≥35	13.0	200
TL1204-LB1	≥1.40	7-17	≥50	12.7	200
TL1304-L	≥1.30	7-17	≥40	4.0	300
TL1401-L	≥1.30	7-17	≥40	10.0	180
TL1703-L	≥1.25	12-25	≥30	7.0	180
TL1704-L	≥1.25	15-30	≥30	7.0	180

◆ High Level — Intend for oil and water sealing for gasoline, diesel and all kinds of internal combustion engines

Material Type	Density (g/cm³)	Compressibility (%, at 34.5 MPa)	Recovery (%)	Tensile Strength (MPa, min.)	Short duration temp. (℃, max.)
TL1305-L	≥1.60	10	7-17	50	350
TL1502-L	≥1.40	11	7-17	45	290
TL1502-LB1	≥1.40	12.5	7-17	45	290
TL1502-LJB1	≥1.45	9	7-17	45	290
TL1513-L	≥1.50	10	7-17	45	220
TL1515-LB1	≥1.50	15	7-17	50	290
TL1516-L	≥1.40	15	7-17	50	250

◆ High Level — Intend for gas sealing for gasoline, diesel and all kinds of internal combustion engines

Material Type	Density (g/cm³)	Tensile Strength (MPa, min.)	Sealing Performance, nitrogen (cm³/min., at 1MPa)	Short duration temp. (℃, max.)
TL1305-L	≥1.60	10	≤1.0	350
TL1513-L	≥1.50	10	≤0.5	220
TL1515-LB1	≥1.50	15	≤1.0	290
TL1516-L	≥1.40	15	≤1.0	250

◆ Middle and High Level — Intend for Pipe & Flange Sealing Gasket

Material Type	Density (g/cm³)	Tensile Strength (MPa, min.)	Change in Area （%, at 150℃, 14.1Mpa）	Short duration temp. (℃, max.)
TL1204-LB1	≥1.40	12.7	≤30	200
TL1502-LB1	≥1.40	12.5	≤20	290
TL1502-LJB1	≥1.45	9	≤20	290
TL1515-LB1	≥1.50	15	≤15	290
TL1516-L	≥1.40	15.0	≤10	290

◆ Middle and High Level — Intend for General Mechanical Sealing Gasket

Material Type	Density (g/cm³)	Tensile Strength (MPa，min.)	Short duration temp. (℃，max.)
TL1201-L	≥1.28	13.0	200
TL1305-L	≥1.60	50	350
TL1502-L	≥1.40	11	290
TL1502-LB1	≥1.40	12.5	290
TL1502-LJB1	≥1.45	9	290

◆ Low Level — Intend for making Non-asbestos Composite Sheet or Heat Insulation Material , Cushion and Filler

Material Type	Density (g/cm³)	Tensile Strength (MPa，min.)	Short duration temp. (℃，max.)
TL1300-C	≥1.10	3.0	250
TL1304-CG	≥1.19	3.1	250
TL1310-C	0.8-1.1	2.0	250
TL1514-CG	0.9-1.2	5.5	250